When it comes to the body trims, Chevy made it their purpose to give buyers several options to choose from. The 2010 Camaro comes in five different trim levels, which includes: base LS, 1LT, 2LT, 1SS, and the 2SS. The V6 comes in the LS, 1LT and the 2LT trim levels, while the V8 option will be found in the 1SS and 2SS trims.
The Camaro-Chevrolet 2010
The challenge of changing the lights is very real. Car manufacturers have made the lights very hard to remove that car owners opt to go to the shop to have it replaced instead of taking the time to analyze the challenge. Here are the best ways to replace the Camaro's tail lights.
1. Go to the trunk of the car and remove the carpet at the rear end of it.
2. You will see 2 wing nuts over there. Remove these nuts and set them to the side.
3. Pull the assembly for the tail light forward. There are sockets of 2 varying colors there. The white socket has the bulb and the other one is gray.
4. Depending if it has a tab or not, turn the sockets in a clockwise direction or otherwise.
5. With a gentle pull, grab the bulb from the socket. Replace the bulb and put it back on the socket where it is designated. There are specific locations as to where the bulbs like the 194 bulb will go. There is only one way to place the bulbs and so you will never go wrong with it.
6. Once you got the bulbs in place, set the tail light back and secure the wing nuts to the assembly.
7. Place the carpet back and presto! You are done with your task of changing the tail light bulbs. Congratulations! You just saved money and time going to the shop.